KickstarterForum.org

I'm getting around to fixing the cabin sole. The leaks are taken care of so now I can focus on the restoration.

I have 3 issues:

- Cracks between the wood
- Water staining + dirt
- Slightly lifted boards

How do I go about fixing each of these issues?

I haven't wanted to fill any gaps with varnish, epoxy, or whatever until the cracks are clean.

I'm toying with the idea of sanding the whole floor but it's a huge job and I need to take care of other things first. So if there's a temporary measure in between then that would be nice.

Do I just sand the slightly raised boards flat? I tried getting underneath but that's impossible.

Have you managed to fix it?

Oh my god! This wooden floor is destroyed by mould. Isn't it easier to buy new wood for the floor rather than spend a lot of time recognising it? When my home was flooded, I had a lot of mould in the house, and I called a water damage repair company o deal with it. After they dried my house, I found out that the floor was destroyed, so I was struggling between buying new wood or reconditioning the old. I have made some calculations and understood that buying new wood for the floor would be easier and cheaper.
________________
https://www.lawtoncr.com/water-damage-r ... ge-repair/

From my limited time researching solar is that you don't want to mix and max panels. You might be able to get away with a single 220w to kind of over panel the system so it maxes out the wattage but you gotta be careful about the volts and amps and make sure the solar input can handle it the larger panel. If you don't want to over panel then just get one 2 hundred watt or two 1 hundred watt panels. Try these ones https://generatorpick.com/best-solar-generators/

If a homeowner installs solar with a secured or unsecured solar loan, the loan will always remain their liability, even if the property is sold. As a result, if you're looking to buy a home and the previous owner installed solar panels through a loan, you don't need to worry about any additional payments or contracts. If you buy a solar panel system, you own the system, either outright (if purchasing with cash) or after repaying your solar loan. If you lease the system or sign a power purchase agreement (PPA), a third party owns the solar panel system. ... Note that PPAs are not legally permitted in many areas. Go to my Profile and you can find all Solar Panels material there...

It's great that you've taken care of the leaks and can now focus on restoring your cabin sole. For the cracks between the wood, you can use a wood filler or epoxy resin to fill them in. Make sure to clean the cracks thoroughly before applying any filler to ensure a good bond.
If you're dealing with water damage in other areas of your home, you might want to consider professional water damage restoration services. https://www.alldryus.com/new-york/new-york-city-water-damage-restoration/ offers expert water damage restoration services in New York City. Their team can help restore your home to its pre-damaged condition, ensuring a safe and healthy environment.

To fix the cabin sole, start by cleaning out the cracks between the wood and filling them with a suitable wood filler or epoxy. For water stains and dirt, clean the floor with a wood-safe cleaner and, if needed, use a mild bleach or oxalic acid, testing it first in a small area. If some boards are slightly lifted, sand them flat with a belt or orbital sander. If sanding the whole floor feels too big a task right now, focus on the most visible areas to improve the appearance temporarily until you can tackle a full sanding job.

It sounds like you’ve got a solid plan for tackling your cabin sole restoration! Here are some tips for each of your issues:

Cracks between the wood: First, clean out the cracks thoroughly with a putty knife or small chisel to remove any debris. Once they're clean, consider using a wood filler or epoxy designed for flooring. If the gaps are significant, you might also look into slivers of wood that match your floor for a more natural look.

Water staining + dirt: For the stains, a gentle scrub with a mixture of water and vinegar or a wood cleaner can help. If the stains persist, you might consider using a fine-grit sandpaper just on those areas, followed by a touch-up with a suitable finish to blend them in.

Slightly lifted boards: If you can’t get underneath, sanding the lifted areas flat could be a good temporary solution. Use a belt sander or orbital sander, but be cautious to not sand too much, as you don’t want to create dips. For a more permanent fix, you might want to try applying a little water to the lifted edges; sometimes, moisture can help the wood settle back into place.

Sanding the entire floor can be daunting, so focusing on these targeted areas first can save you some effort. Once you’re ready to do a full restoration, you’ll be in a better place. Good luck with the project!